Plastic Ball Valve

The Plastic Ball Valve turns the ball on and off to control the flow. When the ball is rotated to a tight fit with the sealing surface of the seat, the valve is closed and the seal ensures that the valve does not leak. When the ball is rotated to the position separated from the sealing surface of the seat, the valve is open and the fluid can pass smoothly. In addition, the opening of the plastic ball valve and the flow rate are basically linear proportional changes, so it can also be used to control the flow rate.

• Strong corrosion resistance: Because the plastic ball valve is assembled by injection molding parts of specific materials, it has very high corrosion resistance and can resist the erosion of a variety of corrosive media.

• Low fluid resistance: The flow path design of the plastic ball valve is reasonable, the inner wall is smooth, and the fluid resistance is very small, which is conducive to improving the flow rate and efficiency of the system.

• Light weight, small size: plastic ball valve material consumption, small size, light weight, small installation size, easy to install and maintain.

• Easy operation: The plastic ball valve can be quickly opened and closed by rotating 90°, and the operation is simple and rapid.

• Good sealing performance: the sealing parts of the plastic ball valve are usually made of elastic material, which has good sealing performance and can ensure that the valve has no leakage in the closed state.

Design Standard：

Socket Fusion:          DIN 16962

Coupling to Pipes:    ISO 3609, DIN 8077, UNI 8318, BS 4991

Threaded Couplings: UNI-ISO 228/1, DIN 2999, BS21

Flanged Couplings:   ISO 2084, UNI 7442/75, DIN 8063, ASAANSI B.16.5 150

Size:                          DN20~110

Types:                       Socket Fusion, Butt Welding, Threaded Couplings, Flange etc.

Materials:                  Body and Ball PP, UPVC, RPP, PVDF, PPH, CPVC etc.

                                 Seat PTFE, EPDM-FPM etc.

Test Standard:          ANSI, DIN, JIS, CNS

Working Pressure:    CLASS150, PN10/16